Cleaning a guitar is not a fun game, but you need to do it on a regular basis. Your guitar might get dirt, dust, and other debris which will decrease the quality of the guitar.
For these reasons, wiping down is a necessary task to make your guitar is endurable for a while. Wiping down the outside of it is not difficult, but you are not sure how to clean maple fretboard. Keep on reading to know how to deal with this issue!
1.Your guitar gets dirty when…
The dirt in your guitar depends on the environment and condition you most play in. Also, the time you play the guitar has displayed this frequency.
If you play guitar in every week, then you need to clean your guitar at least once or two a week. Sweat and grease will be clogged on the guitar finish and remove the lacquer. Additionally, these also can damage your guitar in the maple fretboard in particular.
What’s more, it ought to catch and harm other inside elements and the hardware, causing even more bad issues as well.
2.Prevent dirt on your guitar
There are two major things you need to do for preventing dirt – wash your hands (before playing), and clean your guitar on a regular basis. It sounds simple but it is a daunting task indeed!
Wash your hands first
Someone will think that they have to wash their hands before playing is a weird action, but they do not know that sweat and grease will cause worse problems for their guitars.
If you want to protect your guitar for a while of using, then you should do it. Always remember to wash your hands with soap before touching your guitar.
Protect your guitar all the time
Please keep in mind that you always need to put your guitar into its case when you do not play it.
By doing this, all elements of your guitar will be decreased dust, dirt and other debris. Also, the weather condition can destroy the guitar that you cannot recognize.
Furthermore, you must not place your guitar under the sunlight or the way that the UV rays can affect the guitar.
This is the time, to begin with cleaning your guitar…
Yes, this is the part I/We want to help you how to wipe down a guitar in general, and especially how to clean maple fretboard. It is not difficult to undertake, but you should know what you need to begin and be patient as well.
Fingerboards on the maple are easy to get dust, dirt, and other debris than other positions in a guitar like ebony and rosewood boards because of their lighter wood tone. How to clean maple fretboard? What are the best ways to clean maple boards in the fretboard guitar?
If you have unfinished maple board, then you should use ultra-fine 000 steel wool to clean it. It will get rid of dirt without getting scratches on the frets. A slightly damp cloth is also a good choice for cleaning; especially on satin-finished maple.
A lacquered maple fretboard, on the one hand, should be cleaned with a damp or a dry cloth only. If you use steel wool to wipe down, the sine will take away the shine with a matte-like finish.
Additionally, lemon oil will completely take away the finish and sheen as well. Please note that you should use a dry or lightly dampened cloth to wash the dirt. If the lacquer is so thick, you will need to drop a little bit of Jim Dunlop Formula 65 Guitar Polish.
With finished maple board, you enable to use paste polish to wipe down these boards only. You should not use this substance for cleaning frets and other boards.
In case you clean maple fingerboards with worn or exposed wood, keep in mind that you should not contaminate those areas with the blackened cloth. With a satin finish and flat fingerboards, you can polish and make the friction these.
Cleaning and polishing frets are not tough tasks to undertake. Use a soft cloth to clean frets firstly. Then, you can polish these frets.
ImageTake a micro-mesh like sandpaper is a good choice for polishing frets completely. This is also a great technique when restoring frets and the entire parts of an instrument which has not been maintained routinely.
When cleaning and polishing frets, it does not mean you make these are pretty and shine again. This also will help the sound of your guitar is better and clear with some slick string.
Cleaning the hardware on your guitar is also careful because metals are caused corrosion, the salts in sweat, and skin oils also enable to develop rust over time.
Firstly, you need to determine some hard parts of the hardware. The bridge, pickups, and frets are the hardest part on the hardware.
Dried sweat could be developed on the saddles. Coils and rust also enable to appear if you do not draw attention to these areas when cleaning. In other words, they are missing places that you need to clean the hardware.
You also need to use a soft cloth to wipe down all areas of the hardware. Then, you can polish it with a light guitar polish. The polish task can be the final task you should do to decrease any dirt while the soft fibers in the cloth will bring the shine frequency back.
In case the hardware on your guitar has much corrosion or rust, then you need to increase the cleaning level. WD-40 is a great example of this situation. It can be used to remove thick grime and rust with a small brush like a toothbrush.
Please carry in mind that you should resemble all parts of the hardware to protect these components first before beginning with a real cleaning process.
In this time, you have read how to clean maple fretboard on my/our guide. Well, let’s start the cleaning process right now and attempt to maintain your guitar regularly. Even if you are busy, try to arrange your time to do this.