How To Clean Your Guitar In A Few Minutes

Recently, have you recognized that the tone of your guitar is not good? And you have no idea the reason why? If yes, your guitar probably needs to clean especially the Rosewood Fretboard.

Is it difficult to make it washed again? The question is not if you know how to clean a Rosewood Fretboard. You are lucky because you come to the right place. Let’s start to find out how…

how-to-clean-your-guitar-in-a-few-minutes

1.Get rid of all strings first

In fact, you should keep clean your guitar each time whenever you change all strings. You will have much better sound when the strings removed dirt and dust.

Additionally, you could not want your strings to get damaged because these can contact with oils, polishes, and damp cloths during your cleaning process.

Remove two or three strings at a certain time to prevent the neck tension when going out of whack.

2.Clean the strings

The best way to remove the grimy-buildup menace is to clean the strings after playing. Chamois is a good material to use for wiping down the strings as a double polishing cloth.

You should wipe down all strings in general at the first time. Then, you pinch each string between your thumb and your index finger.

Do not forget to use the cloth in between. After that, you turn your hand up and down the string length.

2.Clean the strings

Sponge the fretboard

Even you play guitar on a regular basis or not, the fretboard still needs to be wiped down once or twice a year.
It is quite important to prevent all messes with the natural moisture that choose from oils on your fingers. Take a soft and damp cloth to clean your fretboard.

You can pick an old T-shirt or sock will also work on well. Then, you should wring out as much as you can because drops water probably adds on your fretboard.

Read more: How to Connect Guitar to PC: A Complete Guide for Beginners

Please keep in mind that you should use different portions of the cloth as you do not transfer dirt from one fret to another.

If your fretboard has assembled a lot of dust, then you ought to follow your rag cleaning with a light brushing and use some extra fine #000 or #0000 steel wool.

So, you should cover up your pickups when wiping down the steel wool.

Tiny steel wool particles probably stick to the magnets in your pickups. So, you should cover up your pickups when wiping down the steel wool.

If you have to get rid of hard spots, then you enable to use the edge of a card, a damp cotton swab, a small toothbrush, and a pipe cleaner.

When you see your fretboard has dried out or developed hairline cracks, you enable to finish the cleaning process with Gibson’s Luthier’s Choice Fretboard Conditioner. Or you ought to rub one more two drops of oil into the fretboard to condition it.

Mineral, almond or linseed oil is the best to choose from. Please be sure to use excess oil with a soft and dry rag, to begin with, your cleaning process.

It is not complicated to identify how to clean a Rosewood Fretboard, is it right?

Sponge the fretboard

4.Clean the tuning keys and bridge

To clean your tuning keys, you should spray a dry cloth with glass cleaner first. Then, you need to polish each tuning keys to make them gleam.

How about your bridge? Use a pipe cleaner or a small toothbrush to wipe down instead of taking a damp cloth to remove all grime positions.

5.Polish the pickups to make a new look at your guitar

In case your pickups look reddish, this is the time to unscrew their faceplates with an Allen wrench.

Be careful to polish all pickups because you probably disturb the wiring. Also, wipe down the rust with a rust-dissolving agent.
If the pickups do not have any rust, then you just polish these with a soft cloth.

6.Do not miss out the hardware

Though dirty buildup cannot impact on the hardware, it always looks bad whenever you see the guitar.

Rubbing with a cloth is everything you need to do to clean the hardware of your guitar. However, you should also use a mild jewelry or chrome polish to start the cleaning process in this part.

Well, polish does not only help you remove all greasy residue but also this can bring the hardware to be a cluster.Many inexpensive hardware elements have a thin coating of shiny metal do not need to run through the coating and liquid to polish in the moving parts of a tuning machine.

7.Keep the finish of your guitar

Your guitar may have a lacquer finish or other coatings in order to protect the wood’s surface and make it shine. So, you should also prevent dust in this area to help it stays shiny and clear for a while.

Please note that you should cover your guitar and get out of sunlight for long periods of time and also avoid sudden changes in the temperature or weather conditions as well.

When following these guidelines, the finish of your guitar will swell and shrink along with the wood.

Keep the finish of your guitar

8.How to protect your guitar (in general)

After finishing the cleaning process, you probably feel proud of your effort pretty much. Take your guitar on the wall or leave it resting on a stand is your habit to keep the guitar.

However, you should put your guitar back into its case where it belongs to prevent any outside condition and protect it completely.

Conclusion

How to clean a Rosewood Fretboard? It looks like a tiny wonder on your mind when you have already known how to tackle this issue. Follow our guide with above tips and your guitar will be durable for many years.

In other words, you will cost less when playing a musical instrument like a guitar. If you have any question, feel free to comment it in the box. Or if you have a great experience with cleaning your guitar, please share with us.

Back to blog